Books


 
 
Note: Please, Click on the book Name for Downloading or for Opening a Sub-List in new Page

  



All you wanted to know about Short-circuits, this book explain in easy way all  points and question related to short circuit calculations.

 
with this book, you will never need to ask anyone again about short circuit calculations.
 

 

 
 



 
This Book provides guidance for the development of design documents, specifications, and contract documents, architectural and engineering design features, submittals, and supplemental information. 

 

 

 

This Book is designed to give the Engineers an understanding of what is required and what must be completed before the final construction documents are approved. 
This Book defines the minimum requirements for each submission in the production of pre-design, concept design, schematic design, design development, and construction documents. 

 
   
 
 

 

ABB’s Electrical installation handbooks

 
 
1- Electrical installation handbook- Volume 1: Protection and control devices
  
2- Electrical installation handbook- Volume 2: Electrical devices
3- ABB’s Technical Guide No. 1: Direct Torque Control

 

 


 

 
 
 
 
How to estimate electrical construction projects, including everyday labor installation rates.
 
 
step-by-step instructions on how to: 
 
  1. Interpret construction plans and specifications,
  2. What to look for,
  3. And why you should read all of the specifications, even those for the roofing, woodwork, wall construction materials, plumbing, etc. Many times there will be items in these categories of the specifications that impact an electrical contractor’s bidding price.




 
 


This book is very important to the electrical engineers to be familiar with all the building services that he can deal with them inside any building. Most of these systems are mechanical system which will need power for operation. The expert engineer must be aware of the components of these systems and its general theory of operation to provide the right numbers and ratings of power circuits feeding it.


The services included in this book are cold and hot water supplies, heating, ventilation, air conditioning, drainage, sanitation, refuse and sewage disposal, gas, electricity, oil installation, fire services, transportation, Security Installations, accommodation for services, energy recovery and alternative energy.





 

Did you know about MV products and equipment and their environment? Did you know how to choice MV products? Are you familiar with design rules used to calculate the dimensions or characteristics MV products?All the answers is in this section.

 
 



 
This section contains uniform design guidelines for lighting, signal, and sign installations for traffic engineering; it is very useful for designers, consultants, reviewers and managers.

 
 

 


 
 



The Code of Practice for Energy Efficiency of Electrical Installations aims to set out the minimum requirements on energy efficiency of electrical installations in buildings. It forms a part of a set of comprehensive Building Energy Codes that addresses energy efficiency requirements on building services installations. Designers are encouraged to adopt a proactive approach to exceed the minimum requirements of this code.



 
 


 

 
this book contains the following:
 
  1. Symbols
  2. Definitions
  3. Chapter-1: Calculation of the Cross-sectional Areas of Circuit Live
  4. Conductors
  5. Chapter-2: Calculation of Voltage Drop Under Normal Load Conditions
  6. Chapter-3: Calculation of Earth Fault Loop Impedance
  7. Chapter-4: Calculations Concerning Protective Conductor Cross-sectional
  8. Areas
  9. Chapter-5: Calculations Related to Short Circuit Conditions
  10. Chapter-6: Combined Examples
  11. Appendix: The Touch Voltage Concept


 

 
 

 

 
this book contains designs for:
  1. Flat with three bed rooms,
  2. A block of retirement flats
  3. An Architect's Office
  4. A high street shop
  5. Car service workshop
  6. Framing and Horticulture
  7. A village sports center
  8. An Indoor swimming pool
 
this book discuss also:
 
  1. overload protection
  2. Isolation and switching
  3. Earthing and bonding
  4. and other subjects.


 


 
 

 

 
this book contain chapters about:
  1. Use of calculators
  2. Circuit calculations
  3. Voltage drop calculations
  4. Mechanics calculations
  5. Power factor calculations
  6. Transformers calculations
  7. Cable selection calculations
  8. Earth fault loop impedance
  9. Material costs, discounts and VAT calculations
  10. And other topics.


 

 
This book will show you how to perform the maths you will need to be a proficient electrician. It concentrates on the electronic calculator methods you would use in class and in the workplace. 
 
 
 

This book include the following chapters:
  1. Alternating current circuit calculations 
  2. Power factor improvement calculations
  3. Three-phase circuit calculations
  4. Alternating current motors
  5. Application of diversity factors
  6. Cable selection
  7. Lighting calculations
  8. Mechanics calculations
  9. Miscellaneous examples
 

 

 

This book sets out to provide a basic grounding in the design of electrical services for buildings.
 
 
This book includes the following chapter:
  1. Accessories
  2. Cable
  3. Wiring
  4. Cable rating
  5. Circuits
  6. Distribution
  7. Lighting
  8. Power
  9. Protection
  10. Fire alarms
  11. Call and computer systems, telephone and public address systems
  12. Reduced-voltage systems
  13. Communal and closed-circuit TV systems
  14. Lightning protection
  15. Emergency supplies
  16. Lifts, escalators and paternosters
  17. Regulations
  18. Design example



 
 



 
 
This book surveys the broad spectrum of electrical design and installation work, the book is divided into two sections: (1) design of electrical installation systems and (2) practical work.
  
Part 1 DESIGN OF ELECTRICAL INSTALLATION SYSTEMS
  
  1. Regulations governing electrical installations
  2. Designing an electrical installation
  3. Tables from IEE Regulations for Electrical Installations
  4. Distribution of supplies in buildings
  5. Design and arrangement of final circuits
  6. Special types of installation
  7.  
 
 
 
and The practical sections, dealing with the most important wiring systems, is based on the author’s experience, and includes many on-site illustrations and diagrams.
  
 
Part 2 PRACTICAL WORK
  1. A survey of installation methods
  2. Conduit systems
  3. Trunking systems
  4. Busbar and grid catenary systems
  5. Power cable systems
  6. All-insulated wiring systems
  7. Installation of mineral insulated cables
  8. Luminaires, switches, socket outlets and accessories
  9. Earthing
  10. Inspection and testing


 


Navy Electricity and Electronics Training Series (NEETS)
 
 
 
The Navy Electricity and Electronics Training Series (NEETS) was developed for use by personnel in many electrical- and electronic-related Navy ratings. Written by, and with the advice of, senior technicians in these ratings, this series provides beginners with fundamental electrical and electronic concepts through self-study. The presentation of this series is not oriented to any specific rating structure, but is divided into modules containing related information organized into traditional paths of instruction.


 


 



  
  • This section will provide list of power design guides for electrical design engineers these electrical design guides will contain electrical design cases and present its methodical, step-by-step calculation method.

 
 

 

  • The Power Quality (PQ) term becomes very important in the design for electrical networks. Here, you will find books, guides and manuals which explaining in detail the Power Quality (PQ) term and its applications.
 


  

  • Generators is one of the basic elements in any electrical network , all site and design engineers must be familiar with its types, principle of operations , construction , …etc. and here you can find all of this.

 

 
 
 

 

8 comments:

  1. Electrical Installation Designs book
    this document with password can u give it to us >>wait for ur good reply

    ReplyDelete
  2. i cant download Navy Electricity and Electronics Training Series (NEETS) can u upload it again
    thanks in Advance

    ReplyDelete
    Replies
    1. After click the links above, a new page will open, don't care about the message "these files are temporary unavailable", look in the upper right corner of the page, you will find an arrow point to down, click this arrow the download will start automatically.

      Delete
  3. Hi many books have password protection. Could you give me the password?

    ReplyDelete
  4. Please provide me the password for "Engineers' Design Guide" book for which I have already sent mail to you. My e-mail id is r.ashirvad@gmail.com

    Thanks in advance

    ReplyDelete
  5. Please provide me the password for "Engineers' installation design" book.. My e-mail id is sam@cle.co.nz

    ReplyDelete
  6. dear ali..please provide guide on building management systems

    ReplyDelete